Gemstones have always been a viable currency. A million dollars in gold weighs quite a lot, it is cumbersome to carry....the right gemstones can be worth a million dollars and easily fit into a pocket.
Here are some things I have learned about working gemstones that will help anyone who likes to work with stone or is thinking about working with stone. You can get a lot more information from my book HOW TO BUILD BETTER LAPIDARY EQUIPMENT, but this is actually what I have evolved to on my bench, to do the lions share of my work, having gone through the entire smorgasbord of manufactured equipment and home made equipment, several times.
My specialty tumblers and grinders and saws, in HOW TO BUILD BETTER LAPIDARY EQUIPMENT are very viable machinery: they will be even more viable and useful, I am sure, as more people become aware and are educated in how to change stones into money.
Rule #1
I have found that most gem operations can be done on miniaturized equipment with diamond grinding burrs of various sorts, and small diamond blades.
To see the type of tooling I am speaking of, visit:
http://www.lopacki.com
I have gone from massive bench top machines to small motors on movable wood bases which are supremely flexible in their uses and attributes. You get much better at finish and creative work very quickly, employing the smaller bench lathe type machines detailed below, which can easily be built for 20$ or less.
Rule #2
Durability. Build your equipment to last. This is not hard to do at all. Pretty is not important. In fact, you may come to redefine pretty, as you gain respect and even awe through witnessing long term and flawless mechanical operation. Teslas motors still run as they always have, and they are a marvel for you to ponder as you use them.
Rule #3
Safety. A lot of safety is working wet and working outdoors. Your guerrilla shop will make it easy for you to be safe. By being mobile, you can employ the outdoors to your needs. Dust masks are good, but working wet is best, so that no powders ever become airborn. Rinse the work area regularly and well, so powders do not build up.
Your best water source for grinding operations up close is a simple spray bottle used by barbers and gardeners, housewives and window cleaners. Spray the wheels to keep them wet, refill the bottles when necessary. You can make shields for all your grinding operations from plastic milk jug or 2 liter bottoms, as explained below. They are a good idea in some situations.
Try to never work metal chain, wire, or rod on high speed or powerful motors. Thats how fingers and eyes are lost.
There are attachments that can be bought for most motor shafts, which convert a motor into a useful bench machine, like a grinder, or polishing unit, or what have you, with the turn of a couple of allen screws.
The attachment I speak of actually fits over the motors shaft, and is available from 1/4" to 3/4" sizes, to fit those size shafts, and even larger. Harbor Freight sometimes has these, or shop the Foredom company for a more high quality product. Once fastened to the motor shaft this attachment provides a threaded shaft for mounting a grinding wheel, or sanding drum, or flat lap disc.
There are some motor shaft attachments which are pointed and threaded to receive muslin wheels or other cloth polishing wheels.
Places like harbor freight call these motor shaft attachments: arbors. Other search terms: mandrels, chucks. I recommend Foredom motor shaft attachments whenever possible.
Be aware of right and left handed issues with these motor shaft attachments; will the shaft be facing right or left when mounted? The threading on the shaft will be different for different applications. They are sometimes labeled RH or LH. You want the wheel turning toward you, not away from you, for several reasons, the most important being safety, but also because if it rotates away from you, versus toward you, it will most likely loosen itself through use and be a real pain. If you keep your motors nice and portable you can always just turn it around on the bench top if it is turning the wrong way. Also, sometimes you can change the wiring at the motor and get a reverse spin to what you have, check the diagram on the motor if it has one.
The larger motors, like washing machine and dryers motors (1725 rpm 1/3 or 1/2 HP), can be dangerous and are actually overkill in most lapidary situations.
The best motor set up I have is a 1/20th hp motor with a 1/4" shaft, out of an IBM selectric typewriter. Attached to its shaft is a 1/4" mandrell/chuck. Into this chuck I can insert hundreds of different types of grinding bits and wheels. I can even make my own attachments with leather wheels, or silicon carbide cloth, and small diameter nuts and bolts. On this set up I can easily take a stone from rough shape to polish.
Stones can be rough shaped, prior to grinding, with diamond blades and larger grinders. They can also be flaked/knapped, and broken in other shearing ways, to good effect. Think tile snapping. Also nipping with pliers is effective to trim a rock without specialised equipment. Finally, shields for all wheels can be made from milk jug bottoms or 2-liter bottoms. Just cut the bottle as long as needed, then melt a hole in its bottom for the shaft of the motor to pass through before the wheel or whatver is attached to the motor shaft. Attach to bench or work table with a tack or small flat headed nail.
OK. Motors should always be considered portable. Once you have an attachment on the shaft of your portable motor, so that it can accept grinding and sanding wheels, or diamond grinding bits or whatever, then use quick clamps to fasten the motors where needed on the benches you use. Sometimes spacer wood will be necessary in this clamping operation, to get the wheel off the bench. You can mount motors to permanent spacers easily enough with hose clamps or other things, then just clamp the whole show to the bench. thats how I do it.
If you wish to make a motor semi-permanent in its application, and there are no readily available mounting features on the thing, you can wedge it at the bottom on two opposing sides, and use metal strapping with drywall screws to fasten it in place on a board, and there are other strapping configurations that work well too. Some motors have mounting features, but are out of synch with our particular needs. This is where the ability to fasten a motor in place using readily available materials is a good advantage to have.
I have many motors mounted in esoteric ways, most have been surprising in their longevity. Don't be skeered. Finally -- Never forget to look at old floor scrubbers and other equipment for sale at most thrift stores and flea markets. Some old floor scrubbers make excellent flat laps when reconfigured, and there are many other things that lend parts to educated entrepeneurship.
An important thing to know about motors is this: fans always prolong the life of electrical motors, when situated to dissipate heat. That means you should have the fan blowing on the electric motor in order to cool it, and it will run better for lots longer. Computer fans, I think they are also called biscuit fans, work very well and can be easily wired and configured to turn on when the motor is turned on. Also: when motors get old and carry a good load, sometimes they need to be hand started after the power is turned on, by spinning the pulley by hand. Don't get your fingers in the belt/pulley interface, you will be very sorry if you do.
If a motor hums but does not move, try hand starting, it usually works. Other motors require capacitors to get going, but sometimes they too can be hand started when their capacitors go kaput, and are bypassed.
Some trix at the guerrilla gem bench: Old abrasives can be reused for lesser but more refined operations. Collect the slurries and other detritus of abrasive actions, and retain. Can be sorted by washing, or dry sifting, too.
Glue stix are a true innovation. They can be used for many things, not least of which is easily dopping stones for working. This gives the operator something to hold onto. Melt the end of a stix with a lighter and apply to the bottom of stone, then after it cools, the glue stix itself can be used to hold the rock when grinding, which saves fingernails and skin. Wood dop sticks with dop wax are best, and small pieces of bamboo branches seem ready made for that operation.
Some very interesting pedal power machines are manifesting around, and pedal power is good. It is not too hard to do.
Diamond blades are going toward the miniature as well, and some can be bought less than an inch across! Many of these cut just fine when sprayed with water, or are otherwise lubricated. Some people make tile saws work for preforming rocks, and thats a good idea I think. Once the stone is down to grinding size though, a small bench-lathe will do all the rest of the work, all in one place, with a minimum of hassle, angst, and expense. Is that not nice?
Drilling stones definitely requires specialised equipment, and the 2 things that need to be remembered when drilling stone with a diamond bit is that slower is generally better, and the item being drilled with a diamond burr should be submerged in water, so that the drilling itself is also submerged. Clear the drilled hole often as you do it, which means: the deeper the hole goes, the more you should pull the bit up, actually exiting the hole, so that mud from the operation does not overheat the bit and cause the diamond plating to separate from the bit. Some neo-experimenters use bow drills and even galvanized pipes to drill holes larger than normal, or out of the ordinary, and I think anything a person can do to accomplish what they are able to conceive is a good thing, and the way its supposed to be. Keep an open open mind.
Large stone or glass drilling is done with an abrasive slurry that is steadily drip-fed to the point of contact between stone and a piece of heavier sized pipe. Very time consuming, but ways can be improvised to speed it up, if thought is given and time is taken. The native Americans had some novel drilling units, most notably a pump type drill that is easy to duplicate and is the most efficient non-electrical drill I have ever seen.
Hand Grinders should be employed whenever possible because they are good efficient tools for the stone sculptor. They are made from small motors modified by attaching a pistol grip, usually by means of a couple of hose clamps around the motor, and through a perforation on the pistol grip handle. Put a chuck on the motor shaft and you can easily utilize all the available diamond grinding bits and burrs to carve large sized sculptures. These also make good hand-sanding units. Cut discs of sandpaper 3-6" across and attach to a mandrel with a washer on either side of paper. This will flex if it has no backing to it, and thats fine because the flexing of the sandpaper disc will allow you better control at contours and in other hard to sand places.
About rocks. They must have good eye appeal, bright, colors, chatoyance, opalaescence, irridesence -- this is where pretty matters, pretty is all. It takes as long to make a strand of dull grey limestone beads as it does a strand of bright green serpentine beads. Always strive for bright colors, clear and clean material free of pits and undercutting, and the nicest polish you can get. If you have a stone people look at and go Wow, thats a good one. Remember though that the dust from some stones is poisonous or hazardous, and with the softer materials it is definitely something to guard against.
Bill Gallagher
Light Happens.
No comments:
Post a Comment